Which climbing formwork system to use...
Climbing formwork is a specialised type of formwork for vertical concrete structures that rises with the building process. While relatively costly but highly versatile, it is an effective solution for buildings that are very repetitive in nature (such as towers or skyscrapers).
Usually, a climbing formwork system consists of the formwork and working platform for cleaning/fixing of the formwork, steel fixing and concreting. The formwork supports itself on the concrete cast earlier so it does not rely on support or access from other parts of the building or permanent works.
A simple climbing formwork is typically used on buildings of five storeys or more. Full self climbing systems are generally used on structures with more than 12 floor levels. However, a combination of crane-handled and self climbing system platforms is viable on lower structures.
One of the most distinct advantages of using automatic or full self climbing system is that through crane-independent forming, striking and climbing, the work process is optimised on the construction site and makes them independent of each other. This allows the planned operational sequences to be maintained and can even be accelerated, regardless of weather conditions.
At GHI, there are climbing formwork systems with varying degrees of sophistication to choose from. These systems always comply with the most stringent safety standards.
BR Shaft Platform – for climbing the inside part of the formwork units in lift shafts or staircases...more
CS240/CS180 – the formwork and climbing platform are lifted off the structure and relocated at the next level as a single unit using a crane....more
QPMX Automatic Climbing System
This is used for forming tall structures without the help of crane. Construction can be carried out within a short time frame, whilst maintaining quality and dimensional accuracy.
In this system, the wall formwork and the working platform slide along the wall using hydraulics. It eliminates the need for crane to handle the wall panels and brackets. Crane is required only for the initial and final lifts for mounting and dismantling purposes respectively.
BR Shaft Platform
CS240 and CS180 Climbing Systems
